Would you want a 6-8\" pyro on your desk

=Tempest= · Post by **=Tempest=** » Wed Jul 11, 2007 8:18 pm

Will that model be released publicly? I'd love to put it into Freespace 2. A cockpitted pyro would be loads of fun to fly around. If it's not more difficult, it'd be nice if the map was all in one texture, too.

It'd be a shame for that beauty to not to be flown around! Keep it up!

I'm probably going to end up buying one of these...

Sllik · Post by **Sllik** » Fri Jul 27, 2007 12:19 pm

Just as a side-suggestion, once this initiative is done...

We should take an altered version of the completed desk pyro to be used as a trophy, start up a new ladder, and make the trophies your prize for winning.

BUBBALOU · Post by **BUBBALOU** » Wed Aug 08, 2007 9:39 am

Well I am back.. had to replace a power supply after some troubleshooting on my main rigg

sorry for lack of updates

in chat someone who shall remain the Nameless Zoob! that he is, commented that other pyro's looked more realistic than the DBB Untextured Desk Model.
I replied... this is going to be cast into plastic, so it does not require textures.

So with that in mind, let's put that statement to the test!!!!!@@@ Shall We!! I Dug through an Online Archive and rendered some untextured models that I found. Some of which are not available to the Public!

The Pyro's shall remain Nameless... the rest is history

\"Smoke a Zoob\" go's out to the Idea behind this post!

{ninja edit] it will be updated with 5 versions in a day

CDN_Merlin · Post by **CDN_Merlin** » Wed Aug 08, 2007 12:43 pm

I like the 3rd one in each pic except from pic #2 I like the 1st one.

CritterB · Post by **CritterB** » Wed Aug 08, 2007 10:54 pm

Aren't those the same ones from a front and back view? Either way, I agree that I like that one best as well and since I have been following this thread but not posting I want one of these too. Keep up the good work Bubba. ~

Phaser · Post by **Phaser** » Sun Aug 19, 2007 3:49 pm

AWESOME bubba!

Aus-RED-5 · Post by **Aus-RED-5** » Tue Aug 28, 2007 9:16 am

Uhhhh... what's the go with this project?

Bubba,
Have you heard from KB about the next step?

Is he even checking any of his projects here anymore?

KoolBear · Post by **KoolBear** » Wed Sep 12, 2007 11:32 am

Let's do it ...

BUBBALOU · Post by **BUBBALOU** » Wed Sep 12, 2007 11:48 am

you're back, ready willing and able I hope?

Good, I'm almost done reinstalling everything on my PC - which was corrupted by a embedded DRM file hidden in an driver update from Microsoft Windows update site claiming to be one from Creative.

Been 1 1/2 weeks so far...

Koolbear - 3proVerts units/boards then This -- status?

One Page to View Now Pyro - GX

CDN_Merlin · Post by **CDN_Merlin** » Wed Sep 12, 2007 12:37 pm

BUBBALOU wrote:you're back, ready willing and able I hope?

Good, I'm almost done reinstalling everything on my PC - which was corrupted by a embedded DRM file hidden in an driver update from Microsoft Windows update site claiming to be one from Creative.

Been 1 1/2 weeks so far...

You let Windows Update install hardware drivers? tsk tsk.

Aus-RED-5 · Post by **Aus-RED-5** » Thu Sep 13, 2007 3:18 am

KoolBear wrote:Let's do it ...

Yes, please!

BTW - Welcome back KB!

KoolBear · Post by **KoolBear** » Sat Oct 13, 2007 3:45 pm

Thank You Aus ...

Bubba ...

CDN_Merlin · Post by **CDN_Merlin** » Wed Apr 23, 2008 11:21 am

Any status update on this? I still want one.

Aus-RED-5 · Post by **Aus-RED-5** » Wed Apr 23, 2008 4:16 pm

Me too.

Spooky · Post by **Spooky** » Thu Jul 10, 2008 9:02 am

BUBBALOU · Post by **BUBBALOU** » Thu Jul 10, 2008 12:11 pm

pyro model is 2nd to the 3dpro adapter run

models have been ready since July of last year (2007) then i put next stage in motion when i began work on the pilot - but had to stop, and began waiting for a response from KB. I have since given up on that, and continued on my sideline project of an extremely detailed and ready for film gx model.

yes the lowpoly cad model for the desktop model has been ready since last year

Spooky · Post by **Spooky** » Thu Jul 10, 2008 5:06 pm

Aus-RED-5 · Post by **Aus-RED-5** » Thu Jul 10, 2008 6:16 pm

Spooky wrote:.... a physical model that a person can pick up and walk off with that is meant to be displayed on an actual desk, desktop.

That's the one.

Spaceboy · Post by **Spaceboy** » Fri Jul 24, 2009 12:06 am

Whatever happened with this?

Seemed like everyone was very into this for like a week, then gave up on it.

How strange. This would be awesome if it happened though.

Valin Halcyon · Post by **Valin Halcyon** » Mon Jul 27, 2009 12:26 pm

I'd very much like a 12\" Pyro-GX (Eagle's). Did this project just evaporate?

At least I still have all the original max and 3ds files for Eagle's GX. The reason ours came out so well was because, well, I was rather anal about the detail and so was Eagle.

We used an enoumous number of screenshots from D2's intro/outro and escape/arrival videos to get all the elements together. We added the concussion missiles because, quite honestly, the GX looks weird without them. I don't know how we missed the missile mounts...they were there in the intro movie, clearly visible.

When we had finished the ship, we took some renders and sent them to the fellow over at Volition who had been the guy that was going to do the original D4 Pyro-GX. His response was golden... \"Better than the original...\". Eagle was, how should we say, in a state of euphoria for some weeks after that.

Spaceboy · Post by **Spaceboy** » Tue Jul 28, 2009 8:50 pm

Seems like nobody took any actual steps to do anything except for the 3d model guys, I wonder why it's still stickied.

Isaac · Post by **Isaac** » Tue Jul 28, 2009 8:56 pm

Spaceboy wrote:Seems like nobody took any actual steps to do anything except for the 3d model guys, I wonder why it's still stickied.

I like to see koolbear's posts on the first page of forum sections. This whole site will only survive for so long.

KoolBear · Post by **KoolBear** » Sun Jan 30, 2011 8:07 pm

I have two! Nearly lost my job printing the second one. We need some to create a mold so we can cast these!

sdfgeoff · Post by **sdfgeoff** » Sat Feb 26, 2011 5:09 pm

WOW something finally happened here.
They look awesome, and I would love to help, but I have no idea how to make molds...
Did you do those by 3D printing? Well, I suppose it was, there is no other way.

I actually thing that that shape is a bit complex for one mold. I think you would need a few:
1) Main fuselage, cockpit, engines and lower wings (you may actually have to do the lower wings separately too, but I'm not sure)
2) 2 left hand lasers
3) 2 right hand lasers
4) Upper wing
5) Other upper wing

When It's done I'll probably buy one.

Isaac · Post by **Isaac** » Sat Feb 26, 2011 7:27 pm

WWWOOOOOW!!! AMAZING!

Aus-RED-5 · Post by **Aus-RED-5** » Sat Feb 26, 2011 8:37 pm

They look like candy! lol

ummm candy pyrossss.....

Isaac · Post by **Isaac** » Sat Feb 26, 2011 10:23 pm

Aus-RED-5 wrote:They look like candy! lol

ummm candy pyrossss.....

OHH! I WOULD SOOOO EAT A PYRO!!

Ryujin · Post by **Ryujin** » Wed Mar 02, 2011 7:12 am

I eat pyros for breakfast.

I'd still love to have one of these on my desk. Let us know how we can help.

KoolBear · Post by **KoolBear** » Wed Mar 02, 2011 6:14 pm

Help me find someone that can cast it.

Aus-RED-5 · Post by **Aus-RED-5** » Sat Mar 05, 2011 1:08 am

http://www.shapeways.com/ ?

Thenior · Post by **Thenior** » Sat Mar 05, 2011 9:20 am

I asked the guys over @ polycount. I've seen some impressive stuff come from those guys.

http://www.protodemon.com/quote/
http://robotthecompany.com/

Those are the people they recommended.

Ryujin · Post by **Ryujin** » Tue Mar 15, 2011 6:56 am

Maybe we can get some free quotes from these guys KB?

Sarrus · Post by **Sarrus** » Wed Aug 10, 2011 12:56 pm

I've kind of hoped for a number of years that this would eventually work out... any word on progress?

Would you want a 6-8\" pyro on your desk

Re:

Re:

░

░

Re:

Re:

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk

Re: Would you want a 6-8\" pyro on your desk