For system help, all hardware / software topics NOTE: use Coders Corner for all coders topics.
Moderators: Krom , Grendel
Buck
DBB Captain
Posts: 559 Joined: Thu Dec 03, 1998 3:01 am
Location: San Luis Obispo, Ca.,USA
Contact:
Post
by Buck » Sat Oct 02, 2004 7:38 am
Hey folks, I'm back in the States for a couple of months and trying to find a motherboard for my ol' computer. I need one with 5 PCI slots, AGP and a slot 1 for 750Mhz Pentium III. Any ideas where to look, I'm not having much luck.
AceCombat
Owned by Timex
Posts: 6516 Joined: Sat Apr 12, 2003 2:01 am
Location: Oakwood, GA
Post
by AceCombat » Sat Oct 02, 2004 6:14 pm
man, the only 440BX mobo i have is a dually SECC that is in my server. i can look around though
Capm
DBB DemiGod
Posts: 2267 Joined: Thu Nov 05, 1998 12:01 pm
Location: Topeka, KS
Contact:
Post
by Capm » Sat Oct 02, 2004 7:15 pm
Look around for a Soyo 6ICA I've used them for years with a p3 450 and p3 1ghz slot 1's and they're great boards.
edit-
couldn't find a 6ica - but here is a
Soyo SYBA+ Slot1
Mobius
DBB_Master
Posts: 7940 Joined: Sun Jun 03, 2001 2:01 am
Location: Christchurch, New Zealand
Contact:
Post
by Mobius » Sat Oct 02, 2004 9:55 pm
Intel SE 440BX-2 is your solution. Happen to have one right here too! Forget overclocking though - impossible with the intel board.
Buck
DBB Captain
Posts: 559 Joined: Thu Dec 03, 1998 3:01 am
Location: San Luis Obispo, Ca.,USA
Contact:
Post
by Buck » Sun Oct 03, 2004 10:00 am
Thanks for the help folks. The Soyo board looks interesting. I'd sure like on with ATA/100 support though. I would also like to be able to overclock with software. Please let me know if you think of anywhere else to look and I'll post back if I find something.
AceCombat
Owned by Timex
Posts: 6516 Joined: Sat Apr 12, 2003 2:01 am
Location: Oakwood, GA
Post
by AceCombat » Sun Oct 03, 2004 11:11 am
Buck wrote: I'd sure like on with ATA/100 support though.
probably would be best to get a stand alone ATA-100/133 Card
Capm
DBB DemiGod
Posts: 2267 Joined: Thu Nov 05, 1998 12:01 pm
Location: Topeka, KS
Contact:
Post
by Capm » Sun Oct 03, 2004 4:01 pm
Yea, and add on board is probably the way to go with ata/100
Soyo boards allow overclocking in the bios, but the p3 slot 1's don't overclock much.
AceCombat
Owned by Timex
Posts: 6516 Joined: Sat Apr 12, 2003 2:01 am
Location: Oakwood, GA
Post
by AceCombat » Mon Oct 04, 2004 4:35 pm
Capm wrote: Yea, and add on board is probably the way to go with ata/100
Soyo boards allow overclocking in the bios, but the p3 slot 1's don't overclock much.
yah they arent very OC Happy, last i heard a P3 SECC OC was only a 50-100 MHz jump
Buck
DBB Captain
Posts: 559 Joined: Thu Dec 03, 1998 3:01 am
Location: San Luis Obispo, Ca.,USA
Contact:
Post
by Buck » Wed Oct 06, 2004 9:25 am
Thanks again for all your help. Talked to ABIT today and the BE6II Rev2 is still under warranty. I believe because of continuing capacitor problems. I just need to send them the bad MB and $7. Hopefully the new one will last longer than the old one.
AceCombat
Owned by Timex
Posts: 6516 Joined: Sat Apr 12, 2003 2:01 am
Location: Oakwood, GA
Post
by AceCombat » Wed Oct 06, 2004 11:32 am
now thats a good thing to here.
i found one aswell, but it only has 3 PCI Slots