ran descent under WINE, went to the video tab of the setup window. It locked, then I did the following:
==========================================================
Unfortunantly, I'm way to ignorant to interpret if any of this is significant.
:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce 6150 LE] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:05.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70)
03:08.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
03:0a.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem
==========================================================================
the entire dmesg log was, of course, very long, and, since I assume we are primarily interested in what was happening near to the error, I cut out all but the last 25 lines. Which, to my admittedly uninformed eye, look unrelated. Most obviously happened way before the lockup.
~$ dmesg
...
[ 58.482899] sd 7:0:0:0: [sdc] Unhandled sense code
[ 58.482904] sd 7:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 58.482909] sd 7:0:0:0: [sdc] Sense Key : Medium Error [current]
[ 58.482914] sd 7:0:0:0: [sdc] Add. Sense: Unrecovered read error
[ 58.482919] end_request: I/O error, dev sdc, sector 63
[ 58.482924] __ratelimit: 21 callbacks suppressed
[ 58.482928] Buffer I/O error on device sdc1, logical block 0
[ 58.482931] Buffer I/O error on device sdc1, logical block 1
[ 58.482934] Buffer I/O error on device sdc1, logical block 2
[ 58.482937] Buffer I/O error on device sdc1, logical block 3
[ 58.482942] Buffer I/O error on device sdc1, logical block 4
[ 58.482945] Buffer I/O error on device sdc1, logical block 5
[ 58.482948] Buffer I/O error on device sdc1, logical block 6
[ 58.482952] Buffer I/O error on device sdc1, logical block 7
[ 58.482955] Buffer I/O error on device sdc1, logical block 8
[ 58.482958] Buffer I/O error on device sdc1, logical block 9
[ 65.638141] padlock: VIA PadLock not detected.
[ 92.376033] Clocksource tsc unstable (delta = -186412123 ns)
[ 105.417469] hda-intel: Too big adjustment 32
[ 105.491930] hda-intel: Too big adjustment 32
[ 5072.809466] hda-intel: Too big adjustment 32
[ 5072.856549] hda-intel: Too big adjustment 32
[ 5074.181941] hda-intel: Too big adjustment 32
[ 5074.225179] hda-intel: Too big adjustment 32
===========================================================================
pulled up the syslog in logview so I could watch it live, recreated the error, and got no new lines at all. Repeated with Xorg.0.log. Nothing.
The Lion wrote:You can run regedit in a terminal window to edit the Wine registry using an interface identical to Windows's regedit.
This is a very useful tool to know about, thanks!
The Lion wrote:Descent 3's settings are located under HKEY_LOCAL_MACHINE\\Software\\Outrage\\Descent3.
I also have an entry for HKEY_LOCAL_MACHINE\\Software\\Outrage Enterntainment, Inc.\\Descent 3
There doesn't appear to be anything in it though. Is that normal?
BUT, I set up the PreferredRenderer key like you said, and TADA! I'm past that stupid video tab! THANKS!!!!!
I'm now dying after I try to start the game. I get all the way to the descent "loading" screen, then suddenly the screen reduces from full screen to very small and locks up.
Xorg.0.log messages:
(II) NVIDIA(0): Setting mode "640x480"
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): Setting mode "640x480"
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): Setting mode "640x480"
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
Ick, gotta get it going to higher resolution, that might be whats causing the problem.
I'll play more with it later. thank you VERY much!