DescentBB

Posted: **Tue Mar 15, 2005 5:11 pm**

Having a problem with D3... and its limited only to D3, this problem doesn't recurr anywhere else, or in any other game, etc. Here's the problem...

I use a mouse and n52 Speedpad to play D3. I recently installed a new vid card (since I only had a *gasp* Intel Integrated 845GL Extreme (my @ss)Graphics chip. I installed an nVidia GF4 MX 4000, so now I get a decent frame rate and can kinda sorta play Halo and UT2004, but now in D3 my mouse rapid-clicks. I use the left button for Primaries, right for secondaries, and middle for AB. I can't charge the fusion, it only rapid fires (if you call it rapid), I can't zoom the MD, it instantly fires; and my AB pulses like all hell... so bad I can't get any extra propulsion out of it. The vauss, when flying a BP or Pyro GL, only fires from the left barrel, even when holding the mouse button down... thats how fast the mouse clicks. Can someone help me plz?!! I can't play D3 without my charged fusion or vauss that works right! And god knows I need my AB...

Posted: **Tue Mar 15, 2005 5:44 pm**

Try turning VSYNC on in D3.

Posted: **Tue Mar 15, 2005 5:47 pm**

I did... it didn't change anything

Posted: **Tue Mar 15, 2005 5:53 pm**

add -framecap 100 to your command line.

Posted: **Tue Mar 15, 2005 5:57 pm**

Yep, that and a bunch of other tweaks too. Where is Xeon when you need him?

Posted: **Tue Mar 15, 2005 6:11 pm**

Turn on vsync in D3 and in your driver control panel in addition to -framecap 100.

It is another bug with D3 and higher framerates.

Posted: **Tue Mar 15, 2005 6:24 pm**

Did all that, did that too, and yep, did that one too. But I didn't FORCE my G4 to use VSync, just set it to Application Selected... lemme go try that.

Posted: **Tue Mar 15, 2005 6:40 pm**

K, framecapped at 100, forced VSync... didn't work. Any other ideas?

Posted: **Tue Mar 15, 2005 7:15 pm**

Maybe -framecap 0?

Posted: **Tue Mar 15, 2005 7:41 pm**

Fixed it, but now I'm stuck with a 50 ms frame rate

Posted: **Wed Mar 16, 2005 2:12 am**

What's your Refresh rate on the Monitor itself? Not the vid card, the Monitor itself. FIddling w/that might work, but that is just a guess/idea.

Fus

Posted: **Wed Mar 16, 2005 1:08 pm**

Monitor is refreshing at 85hz... do you think if I set it lower it will help?

Posted: **Wed Mar 16, 2005 1:40 pm**

how did you fix it? setting your refresh lower?
framerate lower? what what what.

Posted: **Wed Mar 16, 2005 11:42 pm**

What driver version are you using fo your vid card ? Anything above 4x.xx and below 6x.xx had problems w/ the mouse. Try the latest one from nVidia or the 67.66 found on guru3d.com

Posted: **Fri Mar 18, 2005 2:37 am**

i had the same problem try -framecap 60 instead of 100

Posted: **Fri Mar 25, 2005 8:39 pm**

Hmm... Could always buy a new mouse...

Posted: **Sat Mar 26, 2005 7:15 pm**

Grendel wrote:What driver version are you using fo your vid card ? Anything above 4x.xx and below 6x.xx had problems w/ the mouse. Try the latest one from nVidia or the 67.66 found on guru3d.com

the newest one is the 71.83. they add a shiznit load of new features. and a couple new tweaks for those of us who have 6XXX cards.

Posted: **Sat Mar 26, 2005 8:21 pm**

Newest one is 76.41..

Posted: **Sat Mar 26, 2005 9:28 pm**

another already?

TY for informing me on that

Posted: **Sat Mar 26, 2005 11:44 pm**

yw -- grab it here http://downloads.guru3d.com/download.php?det=1022

Very good driver for 6800 cards

Posted: **Sun Mar 27, 2005 2:27 pm**

im not on my PC, im at my parents place ATM. father uses a old RAGE-128 Pro All in Wonder card that i once used.

i just got a 6600 Ultra OC Edition. my 5600 shiznitted out on me.

DescentBB

Omg please help me... this is horrid...

Omg please help me... this is horrid...