i opened my precision pro today !!!!!!!!?????

Pizza · Post by **Pizza** » Tue Mar 10, 2009 3:01 pm

inside the bottom there are signatures of singners and artists!!
why the hell are they in there??

Foil · Post by **Foil** » Tue Mar 10, 2009 3:49 pm

Krom · Post by **Krom** » Tue Mar 10, 2009 5:48 pm

Yeah, the mold for the bottom of all precision pros had those signatures on them (the precision 2 had a metal bottom plate so it doesn't have them).

But if it is the trigger button that isn't working for you, the bottom of the stick is the wrong place to look. There are 3 or 5 screws in the actual stick part that you have to remove and then it pops open fairly easily (but be careful not to break the plastic hinges that hold the trigger switch on). After that you just have to find a Omron (or compatible) branded switch and replace the worn out one. Some soldering skills are required though, so don't attempt it if you don't have the right tools.

Duper · Post by **Duper** » Tue Mar 10, 2009 6:27 pm

Pizza wrote:inside the bottom there are signatures of singners and artists!!
why the hell are they in there??

you're kidding, right?

Didn't you ever sign the bottom of the clay things you made in school? don't artists sign their paintings? Obviously these folks were proud of the product.

I saw that too on mine years ago. Pretty cool.

I was looking to see if I could tighten the slop up in the stick's throw. IIRC, it uses a plastic spring? I forget.

My favorite was the 2 large steel ball bearings in the base. Give the dang thing some weight.

Foil · Post by **Foil** » Tue Mar 10, 2009 7:11 pm

Ah, that's right... I remember seeing those signatures. I assume they were the Precision Pro designers.

Grendel · Post by **Grendel** » Tue Mar 10, 2009 8:01 pm

Pizza wrote:inside the bottom there are signatures of singners and artists!!
why the hell are they in there??

Heh. Like Duper said. You can find a lot eastereggs like that in tech equipment if you look close

Digikey carries the trigger & hat switches. I can dig up links to the parts if you need them.

Pizza · Post by **Pizza** » Tue Mar 10, 2009 9:08 pm

i opened the botton only to see if the wiring was damaged somewhere, cause it was ok at the top and the trigger was cliking too..now im looking at a new joystick,,got any suggestions??

gravis exterminator 3d maybe??

Pizza · Post by **Pizza** » Tue Mar 10, 2009 9:11 pm

btw they are not the designers,,

like jeff davis or fred mc or edie adams....

Grendel · Post by **Grendel** » Tue Mar 10, 2009 9:36 pm

Get a replacement PP from eBay

Open the handle of yours 1st tho, maybe it's just a cold solderjoint on the switch.

i opened my precision pro today !!!!!!!!?????

i opened my precision pro today !!!!!!!!?????

Re: i opened my precision pro today !!!!!!!!?????

Re: i opened my precision pro today !!!!!!!!?????