Know any good places to buy toner cartridges, I really don't want to have to give Staples $183.00 for one.
btw, it's for a Xerox XD 105f
New Toner Cartridge
- KompresZor
- DBB Captain
- Posts: 919
- Joined: Wed Jul 31, 2002 2:01 am
- Location: Clearfield, Pennslyvania
- De Rigueur
- DBB Admiral
- Posts: 1189
- Joined: Wed Jun 06, 2001 2:01 am
- Location: Rural Mississippi, USA
-
- Defender of the Night
- Posts: 13477
- Joined: Thu Nov 05, 1998 12:01 pm
- Location: Olathe, KS
- Contact:
The refill kits are messy only when you don't know what you're doing. Be sure to read the directions word for word. Theres more to it than just injecting the ink and popping it in your printer. You might want to check with your printer's manufacturer and see if they give refunds for sending in old toner cartriges like some companies do for copiers. (which they "recharge", and turn around and sell as refirbished)
- KompresZor
- DBB Captain
- Posts: 919
- Joined: Wed Jul 31, 2002 2:01 am
- Location: Clearfield, Pennslyvania
- De Rigueur
- DBB Admiral
- Posts: 1189
- Joined: Wed Jun 06, 2001 2:01 am
- Location: Rural Mississippi, USA
Russell D. Mullenhour
RussPat Industries
Ph: 408-829-2151
Email: tonerrefillsplus@hootingmail.com
http://www.tonerrefillsplus.com
I checked their website when I first posted, but they didn't have a kit specifically listed for your model. You can email the guy and see what he says. I've ordered a couple of times from him and plan to order again in the future. (I do bulk mailings and use a fair amount of toner. With my Lexmark, I had to use a dremel tool to cut a slot in one of the screw heads to get the cartridge open. It was one of those screwheads that can be screwed on, but not off. So it might take a little work on your part to use this method - ymmv.)
RussPat Industries
Ph: 408-829-2151
Email: tonerrefillsplus@hootingmail.com
http://www.tonerrefillsplus.com
I checked their website when I first posted, but they didn't have a kit specifically listed for your model. You can email the guy and see what he says. I've ordered a couple of times from him and plan to order again in the future. (I do bulk mailings and use a fair amount of toner. With my Lexmark, I had to use a dremel tool to cut a slot in one of the screw heads to get the cartridge open. It was one of those screwheads that can be screwed on, but not off. So it might take a little work on your part to use this method - ymmv.)
- KompresZor
- DBB Captain
- Posts: 919
- Joined: Wed Jul 31, 2002 2:01 am
- Location: Clearfield, Pennslyvania