Router forwarding

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 8:48 am

Router forwarding

I would like to see my computer from a friend's and visa versa.

He has a Belkin 54g router and I have a Linksys.

I know the port and the ip address but can't seem to make it work.

I am using "Remote Administrator".

On Belkin's website they have the "Firewall virtual server" page that has a 2 boxes for "Inbound port", a "Type" lilk TCP, "Private IP address and "Private port".

What settings do I need to enter?

The RadMin program works inside the router from one of my computer to another but not outside the router.

CDN_Merlin · Post by **CDN_Merlin** » Wed Jul 21, 2004 8:59 am

What are you tryign to forward? Are you just trying to be a HOST server? If so, then in your router setup, look for a PORT or FORWARD tab and enter in the ports needed to forward and also the LAN IP(192.168.1.x) of your PC.

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 9:09 am

I'm trying to see my computer from his and visa versa.

Does that make us both hosts?

In "Radmin" it gives me the port and I just have to add the IP address.

Is that the port I would use in the Forward area?
=================================================
On Belkin's website they have the "Firewall virtual server" page that has a 2 boxes for "Inbound port", a "Type" lilk TCP, "Private IP address and "Private port".
==================================================
On the above Forward info, where do I enter the port. "Inbound" or "Private port"?

Sorry, this is all "Greek" to me.

CDN_Merlin · Post by **CDN_Merlin** » Wed Jul 21, 2004 10:08 am

Are you trying to see his drives or folders? Like file sharing? If so, then you have to add "File & printer sharing" in your NETWORK icon of the control panel. Then you must SHARE the drives/folders then you can double click your network neighbourhood and browse for your friends PC.

Is this what you want?

STRESSTEST · Post by **STRESSTEST** » Wed Jul 21, 2004 10:51 am

read this wolfe, and start using google you silly man

http://blogs.msdn.com/trishm/archive/20 ... 57566.aspx

port 3389

Krom · Post by **Krom** » Wed Jul 21, 2004 11:27 am

I think what he wants is a VPN between the two computers.

STRESSTEST · Post by **STRESSTEST** » Wed Jul 21, 2004 3:18 pm

hrmm. Most consumer level NAT routers don't allow VPN..
So how about it Wolfe. what is it you are after?

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 4:42 pm

"Radmin is an award-winning multifunction remote control program. Radmin enables you to remotely monitor or work on one or more network computers right from your own workstation. It is a complete remote control solution with such features as File Transfer, NT security, Telnet and Multilanguage Support built-in."

fliptw · Post by **fliptw** » Wed Jul 21, 2004 4:53 pm

that doesn't tell us anything.

Is there any reason you need to messing around inside your friend's machine remotely?

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 5:06 pm

I don't think that has anything to do with my questions, do you?

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 5:09 pm

I'm trying to take control of his computer from mine and visa-versa.

Here's the programs website http://www.famatech.com/

DigiJo · Post by **DigiJo** » Wed Jul 21, 2004 5:23 pm

if you want have control over your friends computer with radmin, he needs to intall the serverpart of r-admin, you need to start the client part of radmin.
(client controls server)

in the radmin client part you put in the ip of your friend and try to connect. be sure your friend has the default port forwarded on his router (4889, i think)

thewolfe · Post by **thewolfe** » Wed Jul 21, 2004 5:30 pm

I think the "default port forwarded" is what I need to do but don't know how.

I have it running on my 3 computers at home with no problem but they're all behind the same router.

STRESSTEST · Post by **STRESSTEST** » Wed Jul 21, 2004 9:12 pm

read the faq over at that site and find out what port/s it runs on. Forward those

BUBBALOU · Post by **BUBBALOU** » Thu Jul 22, 2004 5:30 am

I swear thewolfe is related to Ace...

MD-2389 · Post by **MD-2389** » Thu Jul 22, 2004 2:56 pm

No Bubba, if thewolfe was related to Ace he would've already been doing this: