looking for a PC to operate SmoothWall NOS

AceCombat · Post by **AceCombat** » Sat Jul 31, 2004 10:39 am

PC Specs must meet or exceed:

Pentium II - 266MHz or Higher
MUST HAVE 3 or more PCI Slots
AGP Slot not required
>/= 64 MB PC-100 SDRAM
>/= 2 GB HDD

i already checked around town, just about all the working systems i spotted only have 2 or 1 PCI slots. a few 3 slot systems were found, but they were non-operational, and cost was too much to repair to working status. the reason for needing 3 is that "Smooth Wall" NOS requires 3 PCI NIC devices.

Let me know what surfaces. PM or Email or simple replies ONLY

AceCombat · Post by **AceCombat** » Sun Aug 01, 2004 7:20 pm

any available systems?

*POST TOPIC EDIT*

im going to expand this to:

Compatable parts to build this system, i am looking for.

Parts i need:

1. P-II, P-III SECC or mPGA CPU
2. P-II P-III SECC or mPGA mobo, MUST HAVE 3 PCI Slots
3. ATX or mATX chassis

*NOTE* i have the SD-RAM DIMM sticks, and i have a PSU to use. i will purchase the NIC's for this system.

Bonz · Post by **Bonz** » Sun Aug 01, 2004 7:53 pm

I have a pentium II 350 with 64MB ram, the only thing it doesn't have is the HD.
Its yours for $30+ shipping
The $30 is more of a hasel fee, Because if you lived near me I'd just give it to ya.
It works perfect, it even overclocks well.

AceCombat · Post by **AceCombat** » Sun Aug 01, 2004 7:57 pm

where you live?

Bonz · Post by **Bonz** » Sun Aug 01, 2004 8:06 pm

Grand Rapids,MI

BUBBALOU · Post by **BUBBALOU** » Mon Aug 02, 2004 4:40 am

Ace will send you out the cash, right after he sends out those two blank discs he never shipped out.

Payment first BONZ...just a warning

ACE you know better than to reply...

AceCombat · Post by **AceCombat** » Mon Aug 02, 2004 12:15 pm

dont sh!t on my thread Bubba....