Rollerblade parts

CDN_Merlin · Post by **CDN_Merlin** » Thu Sep 02, 2004 5:29 pm

I lost the screw and washer that goes on my brake wheel. I've looked on the net at a few places that "Rollerblade" has in their FAQ but just wanted to know if anyone uses someplace else?

Provide link please.

Sting_Ray · Post by **Sting_Ray** » Thu Sep 02, 2004 6:44 pm

Brakes? Pu$$y

I hacksawed the brakes off my rollerblades. Going downhill was... well.. interesting =P

CDN_Merlin · Post by **CDN_Merlin** » Thu Sep 02, 2004 7:20 pm

I don't have a death wish. And being married I have others to think about besides me.

DCrazy · Post by **DCrazy** » Thu Sep 02, 2004 7:35 pm

So? Life insurance!

CDN_Merlin · Post by **CDN_Merlin** » Thu Sep 02, 2004 8:02 pm

that is for accidents, not purposful stupidity.

snoopy · Post by **snoopy** » Thu Sep 02, 2004 8:10 pm

I wouldn't worry about brakes- your wheels work just as well- use the "wedge" method or just don't go down long, steep hills- eventually you will want to be good enough on them to be able to stop by turning... It's really not that hard if you practice a little, and have someone around who knows how to skate. I learned by playin roller hockey with the floor- fences stop you pretty well without any damage being done.... So, I'm giving you another vote for scratching the brakes.

(if you insist, I would just go to the local hardware store a buy a comperable hex bolt/pair of washers/nut.

CDN_Merlin · Post by **CDN_Merlin** » Thu Sep 02, 2004 8:30 pm

I know how to skate and since I skate in traffic (streets) and on local bike path, I have to have brakes to stop suddenly.

I didn't figure the hardware store would have this kind of nut/boly combo specially since there is a custom washer just for the brake wheel.

Battlebot · Post by **Battlebot** » Thu Sep 02, 2004 10:12 pm

do you live near a "play it again sports" by any chance?

they do rollerblade repairs for free minus the new parts

heres a link so you can find their locations
http://www.playitagainsports.com/franch ... finder.asp

CDN_Merlin · Post by **CDN_Merlin** » Fri Sep 03, 2004 5:00 am

Thanks, I'll be close to one tomorrow so I'll stop off and see if they have the parts.

Jagger · Post by **Jagger** » Fri Sep 03, 2004 2:54 pm

I left the brake off mine. I can stop faster without it and I don't run the risk of breaking my wrist again because the brake catches on stuff while I'm trying to jump.

BAAL · Post by **BAAL** » Fri Sep 03, 2004 7:36 pm

Merl, sportchek, or sports experts should have em...also check out skateboard/inline skate shops as well.

CDN_Merlin · Post by **CDN_Merlin** » Fri Sep 03, 2004 8:10 pm

The sports store at Rideau didn't have them. I'll be on Bank st tomorrow and I'll check out Play it again sports.

BAAL · Post by **BAAL** » Sat Sep 04, 2004 8:20 am

There is a place right near bank/kilborn that specializes in skates of all kinds----its right near my place---bank and rockingham.....

CDN_Merlin · Post by **CDN_Merlin** » Sat Sep 04, 2004 3:07 pm

Play it again had the screw that fit. Didn't have the washer thing but thats ok.

Rollerblade parts

Rollerblade parts

Re: Rollerblade parts