Joystick malfunctioning.

For system help, all hardware / software topics NOTE: use Coders Corner for all coders topics.

Moderators: Krom, Grendel

Post Reply
User avatar
Tangaroa
DBB Ace
DBB Ace
Posts: 41
Joined: Sun Mar 07, 2004 11:41 pm
Location: New Zealand

Joystick malfunctioning.

Post by Tangaroa »

WHile in burning indica, my joystick started acting oddly on the twist function which I use for rolling,

When i turn it right, it works fine, when i turn it left, half the time it acts like its being turned the other way for the first instant, and half the time it works normally.

I presume this is some sort of mechanical breakage, is there any chance that I could fix it myself, I do not have the money to buy a new one, and if i cannot fix it myself, I will have to do without the twist to roll function, which would be a pain.
User avatar
Grendel
3d Pro Master
3d Pro Master
Posts: 4390
Joined: Mon Oct 28, 2002 3:01 am
Location: Corvallis OR, USA

Post by Grendel »

Sounds like the jerking problem of a Logitech Freedom 2.4 or 3D Pro. The pots are starting to give out, time for a RMA, sorry. If you can't get it returned to the store, call Logitech -- they will replace it if you got it less than a year ago.
MD-2389
Defender of the Night
Defender of the Night
Posts: 13477
Joined: Thu Nov 05, 1998 12:01 pm
Location: Olathe, KS
Contact:

Post by MD-2389 »

Here's the thing....if it is a POT issue, its easily fixable. All it is, is a large generic 50k ohm pot that you can get from Radio Shack for like a dollar. All that would be required is some very light soldering. If you're not comfortable with that sort of thing, ask your neighbor(s).
User avatar
Tangaroa
DBB Ace
DBB Ace
Posts: 41
Joined: Sun Mar 07, 2004 11:41 pm
Location: New Zealand

Post by Tangaroa »

Its a Thrustmaster Top Gun Fox 2 Pro.

But thanks, will see if I can fix it, have soldering iron and solder (somewhere)and can get the other thing.
User avatar
Top Gun
DBB Master
DBB Master
Posts: 8099
Joined: Wed Nov 13, 2002 3:01 am

Post by Top Gun »

That same thing happened to my Wingman Force 3D; shortly after, the entire thing went kaput. Suffice it to say, I'm not planning on buying another Logitech :P.
User avatar
Mobius
DBB_Master
DBB_Master
Posts: 7940
Joined: Sun Jun 03, 2001 2:01 am
Location: Christchurch, New Zealand
Contact:

Post by Mobius »

With a name like Tangaroa, I predict a high likelihood of you being a fellow Kiwi! Welcome to the DBB dude. :)

Please tell us what make and model stick you have.

Have you tried reducing the stick-twist deadzone from 0 to 0.05 or something? That might make a difference. The Logitech 2.4 and 3D Pro use digital potentiometers, which are most pointedly NOT available from Dick Smith at $1 each. I could not identify the make or model of pot when I reviewed the 2.4 Freedom - at http://planetdescent.com/d3help/freedom.shtml

Logitech (and most other brands of stick) are returnable, sometimes even outside the warranty period if you kick up enough of a stink. (I've had 5 Freedom 2.4s - and paid for only 1!)
User avatar
Tangaroa
DBB Ace
DBB Ace
Posts: 41
Joined: Sun Mar 07, 2004 11:41 pm
Location: New Zealand

Post by Tangaroa »

Heh thanks, yeah I am from NZ.

Already said the type though, it is a "Thrustmaster Top Gun Fox 2 Pro".

Had a look inside and it does look like a potentiometer, but its a rather small one with a particular shape that the rest of the top of the joystick seems to sit on.

Hmm, on looking at the pictures, the sensor does look pretty much exactly like the digital one shown. Is there anywhere where I could get a replacement from?

On the other hand, I could also save up and get one of these Logitech Freedom 2.4 wireless ones, spotted a NZ place selling them for $125.
User avatar
BUBBALOU
DBB Benefactor
DBB Benefactor
Posts: 4198
Joined: Tue Aug 24, 1999 2:01 am
Location: Dallas Texas USA
Contact:

Post by BUBBALOU »

Some of us have been down the route of buying cheap joysticks, after a couple of returns... well... we stopped being CHEAP bastages. And bought quality

CH Products was my choice and was well worth it, and yes they sell replacement parts, not that I have needed any. My first one I ever owned I gave away (7 year old CH Combatsick (Gameport))to a budding Descenter/Simmer.

It is worth what you pay for!

Thrustmaster HOTAS is another choice
Post Reply