AMD platforms and four (4) DIMMs

For system help, all hardware / software topics NOTE: use Coders Corner for all coders topics.

Moderators: Krom, Grendel

Post Reply
User avatar
Burlyman
DBB Admiral
DBB Admiral
Posts: 1275
Joined: Sun Oct 16, 2005 5:47 pm
Location: right behind you

AMD platforms and four (4) DIMMs

Post by Burlyman »

Do AMD platforms work with four DIMMs yet? I read somewhere here that there was a problem with that configuration.
--Neo, the fourth greatest pilot in the universe
User avatar
Mobius
DBB_Master
DBB_Master
Posts: 7940
Joined: Sun Jun 03, 2001 2:01 am
Location: Christchurch, New Zealand
Contact:

Post by Mobius »

Yep, they work. However, it is reported that many motherboards drop 5% when the other two slots are filled with RAM.

Best to use 2 large sticks than 4 medium ones.
User avatar
Krom
DBB Database Master
DBB Database Master
Posts: 16135
Joined: Sun Nov 29, 1998 3:01 am
Location: Camping the energy center. BTW, did you know you can have up to 100 characters in this location box?
Contact:

Post by Krom »

It always \"worked\", before when populating all 4 banks the CPU just set the memory speed down from 400 MHz to 333 MHz. Now it keeps it at 400 MHz, however it still performs slower then just two sticks because of the added capacitance forces slower timings.
User avatar
Immortal Lobster
DBB Ace
DBB Ace
Posts: 367
Joined: Wed Jan 18, 2006 5:25 pm

Post by Immortal Lobster »

It doesnt force slower timings, it forces a 2T command rate, which causes a minimal performance hit, I gained an extra .003 seconds in superpi by going to 4 banks from 2, woohoo! ;)
User avatar
fliptw
DBB DemiGod
DBB DemiGod
Posts: 6459
Joined: Sat Oct 24, 1998 2:01 am
Location: Calgary Alberta Canada

Post by fliptw »

if you are inclined to use DIMMs with heatsinks, make sure the slots aren't too close together.
User avatar
Immortal Lobster
DBB Ace
DBB Ace
Posts: 367
Joined: Wed Jan 18, 2006 5:25 pm

Post by Immortal Lobster »

I found heatspreaders made the temps worse actually >.>
pATCheS
DBB Ace
DBB Ace
Posts: 187
Joined: Sat Apr 03, 2004 9:12 pm
Contact:

Post by pATCheS »

939 AMD chips couldn't handle more than two sticks without dropping to 333 up until revision E, aka the Venice core. Haven't heard of any timing issues, but that's not saying much.
User avatar
JMEaT
DBB Meat ByProduct
DBB Meat ByProduct
Posts: 10047
Joined: Wed Mar 10, 1999 3:01 am
Location: USA

Post by JMEaT »

I am currently using 4x 512 sticks in my system (NF4, AMD64 3700+(Venice core))

The board auto clocked the memory MHz down from 400MHz to 333MHz, I just went in and set it back to 400MHz. I do agree the system seemes a bit sluggish in some loading scenarios.

But once things load I see no problems. IE, in WoW it takes a few seconds after the loadging bar is full to initially load the game but once I'm in, Ironforge at prime time with 100's of characters on the screen offers no slow downs or juts of loading.
Post Reply