Can anyone identify this board?
Posted: Thu Jan 29, 2009 6:49 pm
, Umm not really JD its an older one though.Page 1 of 1
Posted: Sat Jan 31, 2009 2:36 am
Its a motherboard , Umm not really JD its an older one though.
, Umm not really JD its an older one though.Posted: Sat Jan 31, 2009 6:35 am
Looks like it might be out of an old (1996-1997-ish)HP. Got any better pictures?
Posted: Sat Jan 31, 2009 6:49 am
That's the only one I have of it.
Posted: Sat Jan 31, 2009 11:24 am
The second card is a riser card. This was put in an old style desktop computer (you know, the kind you used to put your monitor on top of...) Judging from the heatsink on the chipset which is likely a via chipset, I'd say its a Pentium1 generation board probably supported chips from 75 to 150mhz
Don't know if that helps you any
Don't know if that helps you any
Posted: Sat Jan 31, 2009 2:01 pm
id say its a p2 or p3 gen (p2 most likely) it is for a atx case. it is cut up-not a riser card.
Posted: Sat Jan 31, 2009 6:05 pm
I agree with Flatlander, it looks like it came out of an HP (or Compaq) computer. I'd say one of their many \"Convertable Mini Tower\" (called \"CMT\") computers. The extended slots piece and the components you can see of the motherboard look exactly like that style ... that case for which usually fit the ATX style motherboards with little to no modifications.