Dedicated D3 Linux server fail: "No level info from server"
Posted: Wed Feb 29, 2012 3:27 pm
I can't connect to a dedicated server I'm running on a Debian machine. I can't get past the "Waiting for server..." stage - it times out with the following error: "No level info from server". I've inspected the traffic with Wireshark, and the server just doesn't respond to client requests after leaving the "lobby".
If you take a look at my logs, you'll see that the server is rotating through a lot of maps. I'm not sure what's going on, but it's does this every few seconds.
Here's my config:
Here's what I've done:
If you take a look at my logs, you'll see that the server is rotating through a lot of maps. I'm not sure what's going on, but it's does this every few seconds.
Here's my config:
Code: Select all
[server config file]
PPS=8
TimeLimit=60
KillGoal=0
RespawnTime=25
GameName=Descent 3 server
MOTD=Welcome to the Descent 3 server!
MissionName=fury.mn3
Scriptname=Anarchy
ConnectionName=Direct TCP~IP
NumTeams=2
MaxPlayers=9
AllowMouselook=0
AllowRemoteConsole=0
- Downloaded the tarball found here: http://www.descent3.com/files/linux/des ... 386.tar.gz
- Extracted it, made sure all files are readable by everyone, and that scripts and executables are... well, executable ;)
- Patched my D3 client install (Windows) to V1.4