Page 1 of 1

New Toner Cartridge

Posted: Tue May 18, 2004 9:30 am
by KompresZor
Know any good places to buy toner cartridges, I really don't want to have to give Staples $183.00 for one.
btw, it's for a Xerox XD 105f

Posted: Tue May 18, 2004 11:41 am
by De Rigueur
I use toner refill kits.

Works for me.

Posted: Tue May 18, 2004 12:22 pm
by AceCombat
while refill kits are messy, this is what i would recommend aswell. there is a website that sells old toner cartridges, i do not remember the URL for this website, but a quicky google search should turn it up.

Posted: Tue May 18, 2004 8:11 pm
by MD-2389
The refill kits are messy only when you don't know what you're doing. Be sure to read the directions word for word. Theres more to it than just injecting the ink and popping it in your printer. You might want to check with your printer's manufacturer and see if they give refunds for sending in old toner cartriges like some companies do for copiers. (which they "recharge", and turn around and sell as refirbished)

Posted: Wed May 19, 2004 10:08 am
by KompresZor
MD..the Xerox XD 105f is a digital copier/laser printer, not an ink jet printer :roll:

De Rigueur, where do you get your refills from? That is what I'm looking for, a reliable place to get this stuff from. lol.. I can see it now, black powder everywhere :wink:

Posted: Wed May 19, 2004 10:35 am
by De Rigueur
Russell D. Mullenhour
RussPat Industries
Ph: 408-829-2151
Email: tonerrefillsplus@hootingmail.com
http://www.tonerrefillsplus.com

I checked their website when I first posted, but they didn't have a kit specifically listed for your model. You can email the guy and see what he says. I've ordered a couple of times from him and plan to order again in the future. (I do bulk mailings and use a fair amount of toner. With my Lexmark, I had to use a dremel tool to cut a slot in one of the screw heads to get the cartridge open. It was one of those screwheads that can be screwed on, but not off. So it might take a little work on your part to use this method - ymmv.)

Posted: Wed May 19, 2004 8:42 pm
by KompresZor
Thanks :) I'll see what I can figure out