DescentBB

I will update as I dig deeper into my closet.

Heat: 42-0-0
Ebay: 508 positive feedbacks

Shipping is NOT included unless noted so. You pay actual shipping via USPS. It's got to be paid, and I'm not doing it I will ship to Canadia!

Paypal/MO only, paypal address is stresstest@yahoo.com
Reasonable offers accepted.
---------------------------------------------------------------------------------------------------------------------------------


Audio

New, never used SB PCI128 Forgot I had it LOL! well, it's new and it has the disc $10 1 2 3

Cases / accessories

Lian Li PC-65 / PC-67 Hybrid ATX case w/custom work and accessories Well this is going to be a long description. When you look at the pics, remember that the yellowish ones were without a flash, trust me, this case is all about shiney aluminum!.
Two 80mm ADDA in the front.
One 80mm ADDA fan in the rear.
AMD and P4 approved.
Four 5 1/4 bays.
Eight 3 1/2 bays (3 visible, 5 hidden).
Removable motherboard tray.
Four USB connectors in front for easy access.
Includes matching thumb screws.
Completely rounded edges for safety
ATX style case
Dimensions: 490x210x450mm
Window Dimensions: 11.5in x 13in
This is where everything changes.
This case has extreme work done to it!! Read below
Extra front bezel in carbon fiber (from a PC-67. You get BOTH!)
Custom 3-port 12 volt baybus with blue LED indicators. (Use for cold cathodes, fans etc.
2 blue LEDs for hard drive activity in spare 3.5" bay cover. (used for raid setups mostly)
2 5.25 bay covers already cut for CD-ROM stealthing. (Google that if you don't know what it is)
Laser cut top 120mm blow hole that includes an Enermax variable speed control fan (120x25mm)
Laser cut side blow hole in the Plexiglas for direct cooling along the PCI bus. Includes an Enermax variable speed control fan (120x25mm)
$140 + freight 1 2 3 4 5 6 7 8 9

Soldam FJII in pearl. No one has these in the US!!!! You can go to the Soldam site and figure out what it would cost to get one here in the US, You will find that it will run around $450 to get one after shipping. These are not your average case by a long shot.
I want $250? for it. It's new, and nothing has been installed. No box, just what is pictured Gallery

X-Bags lan systemUsed twice. In great shape. $25 1 2 3

Case mods

LED rocker switches NEW 175+ available Bulk buys can get a discount.$2.50 ea. 1 2

6 x Green CCFL kit These are Sunbeam kits and are new in box. Single 12” bulb, inverter (inverter can manage 2 bulbs), wire harness, switch, hardware and directions. $5 SHIPPED 1 2 3 4 5

7 x Red CCFL kit These are Sunbeam kits and are new in box. Single 12” bulb, inverter (inverter can manage 2 bulbs), wire harness, switch, hardware and directions. $5 SHIPPED 1 2 3 4 5

Koolance temp readout display mod **BLUE** I have 74 pieces of new blue 3-digit, 7-segment Koolance LED blocks. It's a simple de-solder of the old red block, and solder in this one. No modifications to the circuit needed. These sell for $12 + shipping over on FrozenCPU's site. Koolance has since copied me and started to sell all of it's products with blue leds now, go figure . If you still have a red one, and want the blue, your set. $9 shipped with instructions. 1 2 3

CCFL cold cathode extension cable 12" I have 17 of these. Made of the same wire the leads are on your CCFL tubes. These are 12" long and work with all major brand CCFL sets. $1 ea 1

Fans / Grills
All fans are new open stock, and some may be pulls from unsold systems. They have no hours of usage.

Delta 60X25mm The famous Delta black label fan.
AFB0612EH
60x60x25 mm
Ball
6800 RPM
38 CFM
46.5 dB
7.5"harness
3-pin
10 available
$3 ea


Motor-One (Sunon) 60X15mm
60x60x15 mm
Ball
4000 RPM
23 CFM
31.2 dB
11.5" harness
3-pin
55 available
$2 ea.



Power Logic 60X15mm
PL60S12H
60x60x15 mm
Sleeve
4000 RPM
18.69 CFM
31 dB
11.5" harness
4-pin
13 available
$2 ea.



Power Logic 80X25mm
PL80S12m
80x80x25 mm
Sleeve
2500 RPM
26.99 CFM
28.2 dB
23" harness
4-pin
64 available
$2 ea.



Sunon 92X25mm
KD1209PTB2
92x92x25 mm
Ball
2600 RPM
48 CFM
33 dB
25" harness
3-pin
21 available
$4 ea.



Thermoengine 60X10mm
mw-610h12c
60x60x10 mm
1 Ball
4000 RPM
16.3 CFM
31.2 dB
11.5" harness
3-pin
67 available
$2 ea.



UV Sensitive 60X15mm
Yate Loon D60SM-12
60x60x15 mm
Ball
3300 RPM
16 CFM
30 db
19" harness
4-pin
10 available
$4 ea



UV Sensitive 80X25mm
Yate Loon D80SM-12
80x80x25
Ball
2400 RPM
28 CFM
32 dB
19" harness
4-pin
24 available
$4 ea.



Yate Loon 60X25mm
D60SM-12
60x60x25 mm
Ball
3300 RPM
16 CFM
30 dB
19" harness
4-pin
18 available
$2 ea.



Yate Loon 80X25mm
D80SM-12
80x80x25 mm
Ball
2400 RPM
28 CFM
32 dB
19"harness
4-pin
7 available
$2 ea.
Same as above


YS TECH 60X15mm
fd1260155b-1a
60x60x15 mm
Ball
4000 RPM
20.6 CFM
33.6 dB
7.5" harness
3-pin
15 available
$3 ea.



Finest metal grills ever made. Metal FX These are all new, but were open stock, so a coupld have a little tarnish? something a dip in tarnix would fix Im sure.
80mm Copper futuristic woman warrior 1
80mm Tinted-Chrome old time car (tarnished) 1
80mm SS Cobra 1
92mm Brass Dragon 1
92mm eggshell powdercoated old time car 1
92mm Copper Cobra 1
92mm SS Space warrior 1
92mm Ultimate badass Stainless Steel Wolverine. I love this one! 1
These are $7 each

2 x LED illuminated acrylic 80mm fan grills new Divx codec needed for the file. 8 bucks for both 1 avi file

Hard drives / CDROM

Laptop 2.5" 9mm 30Gig hard drive This is the cheapest drive in 30 gigs available on newegg here for $80 bucks. I'll let this one go for $65 shipped. 1

I/O

LSI Logic LSI22902 64-Bit PCI to Ultra2 SCSI dual channel MiniHAB board This is a brand new 64-bit PCI host adaptor and comes with the SFF bracket pictured. SCSI4me,com has them for 38 bucks now. Mine will go for $30 shipped 1 2 3

68 pin LVD ribbon with 3 connectors and one PCI bracket external connection No idea what it's worth, $5 1

lots of rounded floppy cables 24" 1xred 1xyellow 1xblue / 18" 1xred Sold! to shibumi77 1xyellow 1xblue Sold! to SN4p / 10" 1xblue $1 each 1

Misc

2 Memorex 25 pack DVD+RW new/sealed 2.4x record speed. $25 ea. 1

Network

Komodo 16-port 10/100 Switch As I said, I upgraded Tuesday to gigabit. no need for these anymore. Work great and never abused. $45 1 2 3 4

Netgear 802.11b Router/firewall/4-port switch MR814 v.1 This is the MR814 v.1 with the large, detachable 5dBi antenna. It include the power supply and stand for mounting on edge. It's flashed to the 4.13 firmware and ready to go. It has been modified with blue/red LEDs replacing the standard Green/Amber LEDs that came with it. $25 1 2

Periphials

Sexy naked woman Mouse PS/2. 5 available Heh, what can I say, they are different.
$10 ea 1 2 3 1 sold to {OC'n}Cyborg, 1 sold to LowryLP

2 x Compaq Smart Card Reader Keyboards New New in the boxes. $10 each 1 2

Blue full sized KB PS2 The mouse was broken in freight, so I tossed the board in the closet. new, no problems with it. $10 1 2

2 x Logitech spare cordless optical mice (no recvievers)Maybe you broke yours? Or modded it beyond use ? $10 ea 1 2 1 sold to jeece

Multimedia KB (USB) and Optical Mouse (USB) Combo white $20 for the set 1 2

Printed optical mouse pads see pics 10.5 inches wide. 1xSpecial Ops, 2xAsian Swords, 1xWorks, 1xCeltic Arms Sold! to nerdtank, 1xCyborg. These are new, and have a very nice quality picture on them. My pics are for space, not quality. If you want a better pic, PM me $5 each 1 2

RAM

256 SODIMM PC2100 Crucial. $40 1 2

2 x 72 pin simms 16 meg ea well, what can I say.. it's been a while since I cleaned the closet 32 megs total. $5 bucks shipped (BTW, this is the ram you add to those laser printers like the recent deal on the Brother HL-1440) 1 2

Misc PC100 64 meg Dimms Look closely at pic 1. the bottom 3 are 64 meg, the top one might be a 32, but I think it is a 64 also. $5 each stick shipped 1 2

Video

ATI AIW 128 PCI Used this for that internal LCD also. This is the PCI version, and I have everything for it. I perminately attached a koolance waterblock to it. But if you don't have water cooling, no worries, the block is 4 times the size of the simple little heatsink it had. Im sure the block with no water will do a better job then the origonal. $40 1 2 3 4


12.1” TFT touch screen, Radiant M100 POS display terminal This was made for POS terminals. It has a ELO 5 wire touch screen installed on it and is USB, BUT I DO NOT HAVE THE DRIVER, so WinXP shows it as a bad device. I looked everywhere for it, but no dice. The TFT itself is bright and full of color as you can see by the pictures. The native resolution on it is 800x600 and will also work at 640x480. This is a great monitor, but I have 3 12.1” monitors here, so it’s gotta go. Includes the VGA cable that also has the audio/USB and KB link on it (for the POS remember?) that’s about 12’ long! And the PSU to power it up with. Might make a great carputer screen or it works well on the rack as I used it. There are NO dead pixels on this screen, but there are a couple of speca between the TFT and the touch screen overlay. $200 1 2 3 4

do those blue keyboards have a shitty keypress limit? this old keytronic is about to ★■◆●, and i have a blue thing going on here, but i don't want a keyboard that i can't trichord on.

No idea bro.. I can check it out I guess.. Needs to be 3 or more? I forget.

i need 3 letters, left shift, and space bar all at the same time

0_0

I'd guess that's something like: Sliding up + down + forward + ab + fire sec

All KB would need an aditional fire prime + turn left + turn down + bank right, totalling in 9 keys simulanousely..

Ti4600 added

i use keys for everything but pitch and fire primary/secondary.

updated with notebook stuff I upgraded from. Adding more later tonight as well.

hmm@Komodo switch... my boss might be looking into one of those...

Your boss needs this switch. Tell him it will give him a super sozed ben|s and it's better then all those viagra emails he gets put together

updated with a ton of stuff

bump

Ti4600 arrived, and works like a champ.

Now I have had the pleasure of going dual-monitor goodness, and it is good!

STRESSTEST wrote:BFG Asylum GeForce FX 5800 Ultra This is still one hell of a fast card. Used DDR2 @ 1000 MHz and the core is 500 MHz. I removed the cooling the day I got it and water-cooled it. It was never over clocked. I replaced the cooling using arctic silver 5 for all ram and GPU. The cooling unit is very clean since it was never used. $200 shipped 1 2 3 4

Oh look, a leaf blower. Oh wait, it actually sucks..








(couldn't resist.. good price)