DescentBB

PC Specs must meet or exceed:

Pentium II - 266MHz or Higher
MUST HAVE 3 or more PCI Slots
AGP Slot not required
>/= 64 MB PC-100 SDRAM
>/= 2 GB HDD



i already checked around town, just about all the working systems i spotted only have 2 or 1 PCI slots. a few 3 slot systems were found, but they were non-operational, and cost was too much to repair to working status. the reason for needing 3 is that "Smooth Wall" NOS requires 3 PCI NIC devices.


Let me know what surfaces. PM or Email or simple replies ONLY

any available systems?


*POST TOPIC EDIT*

im going to expand this to:

Compatable parts to build this system, i am looking for.

Parts i need:

1. P-II, P-III SECC or mPGA CPU
2. P-II P-III SECC or mPGA mobo, MUST HAVE 3 PCI Slots
3. ATX or mATX chassis

*NOTE* i have the SD-RAM DIMM sticks, and i have a PSU to use. i will purchase the NIC's for this system.

I have a pentium II 350 with 64MB ram, the only thing it doesn't have is the HD.
Its yours for $30+ shipping
The $30 is more of a hasel fee, Because if you lived near me I'd just give it to ya.
It works perfect, it even overclocks well.

where you live?

Grand Rapids,MI

Ace will send you out the cash, right after he sends out those two blank discs he never shipped out.

Payment first BONZ...just a warning

ACE you know better than to reply...

dont sh!t on my thread Bubba....