Page 1 of 1
R Axis and D2X-XL
Posted: Wed Jan 18, 2006 11:37 pm
by Fusion
Greetings all,
If this has already been discussed, please quote or direct me to the answer I seek.
That being said...
I've lost R-Axis in this version of D2X, and the Patch @ PD is a dud; said something about the pilot file \"pilota\" is the wrong version or something like that. Is their a update to that patch so I can have my banking back? I am using the Logitech Freedom 2.4 stick.
Fus
Posted: Thu Jan 19, 2006 4:29 am
by Diedel
Did you try to re-configure it in the joystick config menu?
Re:
Posted: Thu Jan 19, 2006 8:24 pm
by Fusion
Diedel wrote:Did you try to re-configure it in the joystick config menu?
Huh?
Fus
Posted: Fri Jan 20, 2006 2:04 am
by Aus-RED-5
Fusion.
I have the same joystick as you.
Though I don't use the \"Roll\" settings in Logitech Profiler. I have noticed that when selecting it and then going into
D2x-XL Options>>> Controls>>> (joystick)Customize Above>>>.
This is what you should see when you select it.
** NOTE ** I got it to set by pushing a button (coz twisting didn't work) on the joy. BUT since then.. I haven't been able to change it! ** NOTE **
Even when set. D2x-XL controls make my pyro roll none stop!
Seems like a bug in D2x-XL to me.
Diedel.
Can you please have a look into this?
Thanks
Posted: Fri Jan 20, 2006 8:39 pm
by Aus-RED-5
Fusion.
Just in case you didn't know.
Diedel has fixed the config option for \"banking\" with the Freedom 2.4. So be sure to d/l the latest version (v1.5.95) of D2x-XL.
Enjoy!
Re:
Posted: Fri Jan 20, 2006 10:24 pm
by Fusion
Aus-RED-5 wrote:Fusion.
I have the same joystick as you.
This is what you should see when you select it.
Red,
Results after Diedel's update:
D2 Stick Profile has all axis set the way their suppose to be(X=X Y=Y Z=Z R=R), but my D2 game says in the Bank box "J1 Z".Change that "R" in your circled section of your pic to a "Z" and that is what I have to use to get my Twist back. I don't understand it, but it works.
Basicly, I twist R, it says Z.
Fus
Re:
Posted: Fri Jan 20, 2006 10:34 pm
by Aus-RED-5
Fusion wrote:Aus-RED-5 wrote:Fusion.
I have the same joystick as you.
This is what you should see when you select it.
Red,
Results after Diedel's update:
D2 Stick Profile has all axis set the way their suppose to be(X=X Y=Y Z=Z R=R), but my D2 game says in the Bank box "J1 Z".Change that "R" in your circled section of your pic to a "Z" and that is what I have to use to get my Twist back. I don't understand it, but it works.
Fus
Yes I know about "R" is now a "Z". I was reporting the error yesturday (7:30pm Australian Time).
Matter not now. For today it is fixed (3:03pm AUS Time).
Posted: Sat Jan 21, 2006 1:50 am
by Grendel
Make sure the throttle is in the middle position while you configure the stick.
Re:
Posted: Sat Jan 21, 2006 10:01 pm
by Fusion
Grendel wrote:Make sure the throttle is in the middle position while you configure the stick.
Gren,
I went into the "Game Controlers" Control panel and made sure the throttle was in the middle. Yet after doing that, D2-XL still says in the bank box of Options>Joystick>Customize Above "J1 Z". As long as it gives me my twist, I should complain too much on what it says in that box.
Game version is 1.5.95
Fus
Posted: Sun Jan 22, 2006 3:29 am
by Diedel
Looks like I exchanged Z and R texts.
